{"product_id":"diy-crx-45mm-rear-wide-fender","title":"DIY CRX 45mm Rear Wide Fender","description":"\u003cp\u003e\u003cspan\u003eDIY CRX 45aMm Rear Fender Flare\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese are printed in PETG at about 1\/4” thickness and about 45mm over stock with an inside lip that can be trimmed if necessary.\u003c\/p\u003e\n\u003cp\u003eEach side is sold in 2 separate pieces. Recommended to tape them together using a strong tape like hvac tape and glue them on the reverse side with hot staples and\/or JB Weld Plastic Bonder. After together, lay 2 layers of fiberglass if you really want to solidify the bond. The pictures CRX did NOT do the fiberglass portion.\u003c\/p\u003e\n\u003cp\u003eOnce pieces are bonded, bodywork it however you see fit or wrap it. You can drill through it and mount rivnuts into your chassis, panel bond it onto your chassis, however you decide to mount it. There are NO holes in it like a typical flare, this gives you the option to reinforce it and bodywork it into your car or do whatever you’d like.\u003c\/p\u003e\n\u003cp\u003ePictures shown are on DA trailing arms and the wheel is a 15x10 +25 with a 10mm spacer so effectively +15. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDue to part being 3D printed it will not be smooth\/perfect in every aspect, but we will try our best!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlease allow up to 1-2 weeks max after purchase as they will be made to order\u003c\/p\u003e\n\u003cp\u003ePrice shown is the shipped price\u003c\/p\u003e","brand":"Speed Circuit Design","offers":[{"title":"Default Title","offer_id":46252248989875,"sku":null,"price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5661\/5347\/files\/9CB472F7-FB09-4FE4-A432-336E00B50658.jpg?v=1792541308","url":"https:\/\/speedcircuitdesign.com\/products\/diy-crx-45mm-rear-wide-fender","provider":"Speed Circuit Design","version":"1.0","type":"link"}